PV sealing

PV sealing

Category:

Flashing and Soil Pipes

PV Seal is a self-leveling neutral moisture-curing sealer for sealing most penetrations on flat roofs.

‍

Specifications

All come with 2 pop rivets to assemble the profile around the grommet.

In addition, restriction profiles are made to custom dimensions.

‍

Item number:

PV Sealing:

Limitation profile:

Item number	Description
249000	PV Sealant - black - 5 liters Covering 1 piece of 80×80 mm pipe with aluminum edge 190×190 mm= approx. consumption 0.89 litersCovering 1 piece of 130×130 mm pipe with aluminum edge 240×240 mm= approx. consumption 1.22 liters

Item number	Description
249170	170x170mm - to max. 60x60mm - Black aluminum
249190	190x190mm - to max. 80x80mm - Black aluminum
249210	210x210mm - to max. 100x100mm - Black aluminum
249240	240x240mm - to max. 130x130mm - Black aluminum
249900	Universal L:1000mm - Black aluminum

‍

Application

Instructions for use:‍B200D↩.

Stapling surfaces must be clean and free from dust, loose particles, grease, snow and frost.
Can be applied from temperatures from 0°C to +40°C.
Adheres to most roofing materials (not PE, PP, PA and Teflon).
Cures 2-3mm per day, depending on temperature and humidity.
Limit profile in the required height - minimum 30mm, installed with suitable adhesive.
The sealer must have a contact surface to the roof surface of at least 45 mm.
Please refer to the technical data sheet and safety data sheet.

‍

Downloads

We are ready to advise and answer questions